| Kode Ref | Parameter Teknis | Nilai Spesifikasi OEM (CDM520D D Series) |
|---|---|---|
| ISO.3.2 | Rated Power | 160 kW |
| ISO.2.1 | Operating Weight | 20000kg |
| ISO.5.1 | Travel Speed | 0-10.8 km/h |
| ISO.3.3 | Displacement | 8.3L |
| ISO.2.1 | BASIC — Operating Weight | 20000kg |
| ISO.2.1 | BASIC — Weight Burden on Front Drum | 11500 kg |
| ISO.2.1 | BASIC — Weight Burden on Rear Wheel | 8500 kg |
| OEM.8 | BASIC — Min Ground Clearance(h) | 422 |
| OEM.9 | BASIC — Wheelbase (L1) | 3186 |
| OEM.10 | BASIC — Grade Ability | 45% |
| OEM.11 | BASIC — L×W1×H (mm) | 6118×2300×3077 |
| ISO.3.1 | ENGINE — Manufacturer | DF Cummins |
| ISO.3.1 | ENGINE — Model | 6CTAA8.3-C215 |
| ISO.3.1 | ENGINE — Displacement | 8.3L |
| ISO.3.1 | ENGINE — Fuel consumption | 28.3L |
| ISO.3.1 | ENGINE — Rated Power | 160 kW |
| ISO.3.1 | ENGINE — Rated Speed | 2200 rpm |
| ISO.3.1 | ENGINE — Emissions Standard | Nation II |
| OEM.19 | DRIVE TRAIN — Drive Type | Hydrostatic Drive |
| ISO.5.1 | DRIVE TRAIN — Travel Speed Forward | 0-10.8 km/h |
| ISO.5.1 | DRIVE TRAIN — Travel Speed Reverse | 0-10.8 km/h |
| OEM.22 | DRIVE TRAIN — Tire Type | 23.1-26 12PR |
| OEM.23 | DRIVE TRAIN — Min.Turning Radius | 7000 mm |
| OEM.24 | DRIVE TRAIN — Steering Angle | 30 ° |
| OEM.25 | DRIVE TRAIN — Swing Angle | 10 ° |
| OEM.26 | VIBRATION SYSTEM — Width of Drum (W2) | 2120 mm |
| OEM.27 | VIBRATION SYSTEM — Diameter of Drum | 1532 mm |
| OEM.28 | VIBRATION SYSTEM — Rim Thickness of Drum | 46 mm |
| OEM.29 | VIBRATION SYSTEM — Static Linear Load | 542N/cm |
| OEM.30 | VIBRATION SYSTEM — Vibration Type | Close-loop Hydraulic Vibration |
| OEM.31 | VIBRATION SYSTEM — Centrifugal Force | 400/300 kN |
| OEM.32 | VIBRATION SYSTEM — Vibration Frequency | 28/35 Hz |
| OEM.33 | VIBRATION SYSTEM — Nominal Amplitude | 2.1 /1.0 mm |
| OEM.34 | BRAKE SYSTEM — Service Brake | Hydraulic Lock Front and Rear Brake |
| OEM.35 | BRAKE SYSTEM — Parking Brake | Oil Cut Front and Rear Wheel Brake |
| OEM.36 | ELECTRIC — Voltage | 24 V |
| OEM.37 | ELECTRIC — Capacity | 120×2 Ah |
| OEM.38 | SERVICE REFILL — Fuel Tank Capacity | 280 L |
| ISO.6.1 | SERVICE REFILL — Hydraulic Tank Capacity | 90 L |
| ISO.1.1 | Seri Produk OEM | Seri CDM512D–CDM520D Rexroth Hydrostatic |
Unit vibratory road roller Lonking CDM520D D Series produksi Lonking Holdings Limited menghasilkan gaya sentrifugal pemadatan tinggi dengan distribusi beban drum presisi (20000kg, penggerak 160 kW) untuk pemadatan tanah dasar, sub-base jalan tol, bandara, bendungan, dan kawasan industri.
Sebagai Authorized Dealer & Distributor Resmi Lonking di Indonesia, PT Cemerlang Perkasa Teknologi memastikan setiap unit Lonking CDM520D D Series melewati tahapan Pre-Delivery Inspection (PDI) menyeluruh di fasilitas Central Workshop Cakung, Jakarta Utara sebelum dikirim ke lokasi proyek atau pabrik pelanggan. Tersedia pula referensi silang di portal induk Lonking CDM520D D Series di www.cepet.co.id.
Struktur rangka & komponen utama berstandar global Lonking Holdings Limited untuk keandalan kerja berat pada kelas kapasitas 20000 kg.
Ditenagai sistem penggerak 160 kW berefisiensi tinggi dengan respons hidrolik presisi dan konsumsi energi/bahan bakar ekonomis.
Kabin/ruang operator ergonomis berpandangan luas dengan tata letak instrumen intuitif untuk kenyamanan kerja lintas shift panjang.
Jaminan garansi resmi pabrikan, ketersediaan suku cadang asli (Genuine Parts) di Central Workshop Cakung, serta dukungan teknisi mekanik keliling di 38 provinsi Indonesia.
Unit Lonking CDM520D D Series (Seri CDM512D–CDM520D Rexroth Hydrostatic) pada divisi Lonking Vibratory Road Rollers memiliki rating kapasitas kelas 20000 kg, parameter jangkauan/kerja utama 0-10.8 km/h, serta ditenagai sistem penggerak 160 kW berstandar global Lonking Holdings Limited.
Ya. PT Cemerlang Perkasa Teknologi menyediakan Lonking CDM520D D Series dalam kondisi 100% baru bergaransi resmi standar Lonking Holdings Limited, lulus Pre-Delivery Inspection (PDI) menyeluruh di Central Workshop Cakung, siap sertifikasi Riksa Uji K3 SILO Kemnaker RI, serta tersedia dalam skema pembelian unit baru maupun kontrak sewa/rental korporasi jangka panjang (12–60 bulan) di seluruh 38 provinsi Indonesia.
Seluruh komponen fast-moving, filter resmi, pompa & seal hidrolik, komponen transmisi/undercarriage, kuku bucket/attachment, hingga suku cadang elektrikal orisinal untuk Lonking CDM520D D Series tersedia di gudang suku cadang Central Cakung Jakarta Utara dengan dukungan armada teknisi mekanik keliling Mobile Service 24/7.
| Kapasitas / Kelas | 20000 kg |
|---|---|
| Jangkauan / Kerja | 2.28/4.45/7.24 km/h |
| Sistem Penggerak | 129 kW |
| Kapasitas / Kelas | 10000 kg |
|---|---|
| Jangkauan / Kerja | 1.9/3.3/9.1 km/h |
| Sistem Penggerak | 85 kW |
| Kapasitas / Kelas | 12000 kg |
|---|---|
| Jangkauan / Kerja | 1.9/3.3/9.1 km/h |
| Sistem Penggerak | 85 kW |
