| Kode Ref | Parameter Teknis | Nilai Spesifikasi OEM (CDM932NYC Rough Terain) |
|---|---|---|
| ISO.3.2 | Rated Power | 60 kW |
| ISO.2.2 | Rated Payload | 2,500 kg |
| ISO.2.1 | Operating Weight | 5,130 kg |
| OEM.4 | Load Center | 550 mm |
| ISO.2.2 | BASIC DIMENSIONS — Payload Capacity | 2,500 kg |
| ISO.2.1 | BASIC DIMENSIONS — Operating Weight | 5,130 kg |
| OEM.7 | BASIC DIMENSIONS — Traction Force | 52 kN |
| OEM.8 | BASIC DIMENSIONS — Breakout Force | 35 kN |
| OEM.9 | BASIC DIMENSIONS — Dimensions (L×W×H) | 5,686 × 2,050 × 2,950 mm |
| OEM.10 | BASIC DIMENSIONS — Wheel Base | 2,371 mm |
| OEM.11 | BASIC DIMENSIONS — Min. Ground Clearance | 320 mm |
| OEM.12 | BASIC DIMENSIONS — Load Center | 550 mm |
| ISO.3.1 | ENGINE — Manufacturer / Model | YN4D086-30CR (Nation III) |
| ISO.3.1 | ENGINE — Rated Power | 60 kW @ 2,400 rpm |
| ISO.3.1 | ENGINE — Rated Torque | 281 N·m @ 1,400-1,600 rpm |
| ISO.3.1 | ENGINE — Displacement | 3.8 L |
| ISO.3.1 | ENGINE — Fuel Consumption | 21 L |
| OEM.18 | DRIVE TRAIN — Transmission | Countershaft Powershift |
| OEM.19 | DRIVE TRAIN — Gear | 2F / 2R |
| ISO.3.3 | DRIVE TRAIN — Torque Converter | Single-stage, 3-element (ratio 3.13) |
| OEM.21 | DRIVE TRAIN — Main Reducer | Spiral bevel, single-stage |
| OEM.22 | DRIVE TRAIN — Final Reducer | Planetary reduction |
| OEM.23 | DRIVE TRAIN — Tire | 16/70-20 |
| ISO.5.1 | DRIVE TRAIN — Max. Travel Speed | 17 km/h |
| OEM.25 | BRAKE SYSTEM — Service Brake | Air drive, 4-wheel (dry) |
| OEM.26 | BRAKE SYSTEM — Setting Pressure | 0.78 MPa |
| OEM.27 | BRAKE SYSTEM — Parking Brake | Flexible-shaft caliper |
| OEM.28 | STEERING SYSTEM — Type | Hydraulic load-sensing |
| OEM.29 | STEERING SYSTEM — System Pressure | 14 MPa |
| OEM.30 | STEERING SYSTEM — Steering Angle | 32° |
| OEM.31 | MAST SYSTEM — Mast Height | 2,110 mm |
| OEM.32 | MAST SYSTEM — Mast Tilt Angle | Front 6° / Rear 10° |
| ISO.4.1 | MAST SYSTEM — Max. Lifting Height | 3,000 mm |
| ISO.4.1 | MAST SYSTEM — Max. Lifting Speed | 600 mm/s |
| OEM.35 | MAST SYSTEM — Standard Fork Size | 125 × 45 × 1,220 mm |
| ISO.6.1 | MAST SYSTEM — Working Pump Flow | 120 L/min @ 2,400 rpm |
| OEM.37 | MAST SYSTEM — Control Valve | 2-spool |
| OEM.38 | MAST SYSTEM — System Pressure | 16 MPa |
| OEM.39 | ELECTRIC SYSTEM — System Voltage | 24 V |
| ISO.3.1 | ELECTRIC SYSTEM — Battery | 2 × 80 Ah |
| OEM.41 | SERVICE CAPACITIES — Fuel Tank | 90 L |
| ISO.6.1 | SERVICE CAPACITIES — Hydraulic Tank | 65 L |
| OEM.43 | SERVICE CAPACITIES — Transmission | 19 L |
| OEM.44 | SERVICE CAPACITIES — Front / Rear Axle | 24 L |
| ISO.1.1 | Seri Produk OEM | Seri CDM932NYC/CDM936NYC Rough-Terrain |
Unit wheel loader Lonking CDM932NYC Rough Terain produksi Lonking Holdings Limited dirancang dengan sasis artikulasi kelas berat, planetary/powershift drivetrain bertorsi besar, serta sistem penggerak 60 kW untuk pemuatan material tambang, batu bara, batching plant, pelabuhan, dan stockpile berkapasitas 2,500 kg.
Sebagai Authorized Dealer & Distributor Resmi Lonking di Indonesia, PT Cemerlang Perkasa Teknologi memastikan setiap unit Lonking CDM932NYC Rough Terain melewati tahapan Pre-Delivery Inspection (PDI) menyeluruh di fasilitas Central Workshop Cakung, Jakarta Utara sebelum dikirim ke lokasi proyek atau pabrik pelanggan. Tersedia pula referensi silang di portal induk Lonking CDM932NYC Rough Terain di www.cepet.co.id.
Struktur rangka & komponen utama berstandar global Lonking Holdings Limited untuk keandalan kerja berat pada kelas kapasitas 2,500 kg.
Ditenagai sistem penggerak 60 kW berefisiensi tinggi dengan respons hidrolik presisi dan konsumsi energi/bahan bakar ekonomis.
Kabin/ruang operator ergonomis berpandangan luas dengan tata letak instrumen intuitif untuk kenyamanan kerja lintas shift panjang.
Jaminan garansi resmi pabrikan, ketersediaan suku cadang asli (Genuine Parts) di Central Workshop Cakung, serta dukungan teknisi mekanik keliling di 38 provinsi Indonesia.
Unit Lonking CDM932NYC Rough Terain (Seri CDM932NYC/CDM936NYC Rough-Terrain) pada divisi Lonking Wheel Loaders memiliki rating kapasitas kelas 2,500 kg, parameter jangkauan/kerja utama 3,000 mm, serta ditenagai sistem penggerak 60 kW berstandar global Lonking Holdings Limited.
Ya. PT Cemerlang Perkasa Teknologi menyediakan Lonking CDM932NYC Rough Terain dalam kondisi 100% baru bergaransi resmi standar Lonking Holdings Limited, lulus Pre-Delivery Inspection (PDI) menyeluruh di Central Workshop Cakung, siap sertifikasi Riksa Uji K3 SILO Kemnaker RI, serta tersedia dalam skema pembelian unit baru maupun kontrak sewa/rental korporasi jangka panjang (12–60 bulan) di seluruh 38 provinsi Indonesia.
Seluruh komponen fast-moving, filter resmi, pompa & seal hidrolik, komponen transmisi/undercarriage, kuku bucket/attachment, hingga suku cadang elektrikal orisinal untuk Lonking CDM932NYC Rough Terain tersedia di gudang suku cadang Central Cakung Jakarta Utara dengan dukungan armada teknisi mekanik keliling Mobile Service 24/7.
| Kapasitas / Kelas | 5600 kg |
|---|---|
| Jangkauan / Kerja | 11.5/36 km/h |
| Sistem Penggerak | WEICHAI/WP10G220E341 — 162kW/2200rpm |
| Kapasitas / Kelas | 3000 kg |
|---|---|
| Jangkauan / Kerja | 917mm/s |
| Sistem Penggerak | 89kW/2200rpm |
| Kapasitas / Kelas | 28.000 kg |
|---|---|
| Jangkauan / Kerja | Max. Fork Lifting Height 2.850 mm |
| Sistem Penggerak | Weichai WP12 Heavy-Duty Turbo Diesel — 247 kW |
